Caution:
The installation must be made by sanitary installators or other professional of the branch.

• The series Aqua-4D® systems are generally mounted downstream of the water meter
  

• Mount the tube in the conduit with the arrow pointed in the direction of flow.
  

• Tube 60Es can be mounted horizontally or vertically, with upwards or downwards directional flows.
  

• Up to four Tube 60Es can be mounted in parallel. The minimum distance between two Tube 60Es is 80 mm measured from centreline to centreline.
  

• No mechanical adjustments should be made to the Tube 60E.

Warning:
To pay attention to the equalization of the different potentials. If necessary, to connect the pipe of an end to the other of the tube with a copper wire (EP 3mm2 CU green/yellow)

• Do not install the tube in the immediate vicinity of electrical equipment such as electrical panels, transformers or other electrical equipment operating under equal or greater voltage.

• The Tube 60 device must be mounted downstream of UV treatment and pumps.

• For apartment buildings, we recommend installing a bypass at the main water inlet as well as a second system in the hot water circulation system with 2 valves ahead of and behind the tube